Great for use on:
Marble, granite, terrazzo, Concrete, and Grout Joints
Cemabond’s H20 Seal is a transparent impregnating water based sealer. It provides water and oil protection for use on all stone surfaces. Its water based formula is low on VOC’s making it ideal for those sensitive to them or in areas where it is required. Great for more porous materials, it can also be used on polished stone as well. It also works well as a pre-grout treatment for easy cleanup during tile installation.
Directions for use:
Apply to a clean, dry surface using a cloth or sponge mop. Allow to penetrate for 15 minutes and then remove any pooling that has occurred. Apply a second coat and again let stand for 15 min and remove any excess.
May vary from 80 to 800 sq. ft. per gallon. For use as a pre-grouting protection, apply 2 hours prior to grouting for easy clean up.
© Regent 1-800-624-8210